Includes siphon, hose, tank safety clamp, fish guards and automatic siphon starter. Up to 60cm length

Read more less

Includes siphon, hose, tank safety clamp, fish guards and automatic siphon starter. Up to 100cm length

Read more less

LCA Planaria Fix is specially tailored to safely elimintate aquarium pests including planaria, hydra and vorticella which can all cause deaths in freshwater shrimp. It is safe for shrimp, fish and aquarium plants. When LCA Planaria Fix is dosed as per instructions, planaria, hydra and vorticella will be significantly reduced or completely eradicated within 5 days of treatment.

Read more less

Seachem Acid Regulator is a safe and effective solution for lowering and stabilizing pH in freshwater aquariums, ideal for species that thrive in acidic environments. With a dose rate of 1 teaspoon (5 grams) per 40 liters, it is available in Australia in sizes ranging from 50 g to 1 kg, making it suitable for tanks of all sizes.

Read more less

Seachem Discus Buffer is designed to lower and stabilize the pH in discus aquariums, maintaining an ideal range of 5.8 to 6.8, which is essential for the health and breeding of discus fish. It also softens the water by reducing hardness, making it perfect for replicating the natural environment of these sensitive species. 

Read more less

Seachem Flourish Advance is a bio-stimulant that promotes accelerated root growth and overall plant development through natural phytohormones, making it ideal for newly planted or pruned aquariums. It supports long-term plant health and resilience, with a recommended dose of 5 mL per 80 liters added daily for optimal results.

Read more less

Seachem Flourish Phosphorus is a concentrated supplement providing phosphate (PO?³?), essential for healthy plant growth in aquariums. It helps prevent phosphorus deficiencies, promoting vibrant leaves and strong root systems. 

Read more less

Seachem GarlicGuard is a natural garlic extract designed to enhance the taste of food, encouraging picky or stressed fish to eat more readily. It is safe for both freshwater and marine aquariums and can be used regularly to stimulate appetite without affecting water quality. 

Read more less

Seachem Gold Basics (50 mL) is a water conditioner designed specifically for goldfish, removing chlorine, chloramine, and detoxifying ammonia to ensure a safe environment. The recommended dosage is 5 mL per 40 liters of water, making it ideal for maintaining clean and healthy water in goldfish aquariums or ponds.

Read more less

Seachem Gold Buffer is a phosphate-free buffer designed to maintain a stable pH between 7.2 and 7.8, ideal for goldfish health in freshwater aquariums. It prevents harmful pH fluctuations, reduces stress, and is safe for both plants and fish, providing a balanced, healthy environment for long-term goldfish care. 

Read more less

Seachem Prime is a complete and concentrated conditioner for both fresh and saltwater aquariums. It is a unique, concentrated conditioner that provides an unparalleled level of protection with an extremely long shelf-life. Seachem Prime quickly and safely removes chlorine and chloramine, detoxifies ammonia, nitrites, and nitrates, and adds essential electrolytes. It also helps to buffer the pH of aquarium water. Seachem Prime is available in 100 ml, 250 ml, 500 ml, and 1 liter bottles.

Read more less

Prime is the complete and concentrated conditioner for both fresh and salt water. Prime removes chlorine, chloramine and ammonia. Prime converts ammonia into a safe, non-toxic form that is readily removed by the tank’s biofilter. Prime may be used during tank cycling to alleviate ammonia/nitrite toxicity. Prime detoxifies nitrite and nitrate, allowing the biofilter to more efficiently remove them. It will also detoxify any heavy metals found in the tap water at typical concentration levels. Prime also promotes the production and regeneration of the natural slime coat. Prime is non-acidic and will not impact pH. Prime will not overactivate skimmers. Use at start-up and whenever adding or replacing water. WHY IT'S DIFFERENT Nearly all companies manufacture a product that removes chlorine. None of those, however, can compare in quality, concentration, or effectiveness to Seachem’s flagship product: Prime. Prime is the second most concentrated dechlorinator on the market after Seachem Aquavitro Alpha™. A single 100ml bottle will treat 1000 US gallons of tap water. Prime will remove both chlorine and chloramines from municipal water supplies. Prime also contains a binder which renders ammonia, nitrite, and nitrate non-toxic. It is very important to understand how those two functions work together. All dechlorinators operate through a chemical process known as reduction. In this process, toxic dissolved chlorine gas (Cl2) is converted into non-toxic chloride ions (Cl-). The reduction process also breaks the bonds between chlorine and nitrogen atoms in the chloramine molecule (NH2Cl), freeing the chlorine atoms and replacing them with hydrogen (H) to create ammonia (NH3). Typically, dechlorinators stop there, leaving an aquarium full of toxic ammonia! Seachem takes the necessary next step by including an ammonia binder to detoxify the ammonia produced in the reduction process. Be very careful when purchasing water conditioners. If your municipality includes chloramines in the water supplies, a standard sodium thiosulfate dechlorinator is not enough. Prime promotes the natural production and restoration of the slime coat rather than relying on artificial or non-native slime compounds. A further bonus for the reef hobbyist - Prime will not overactivate protein skimmers. DIRECTIONS Use 1 capful (5ml) for each 200L (50 gallons) of new water. This removes approximately 1mg/L ammonia, 4mg/L chloramine, or 5mg/L chlorine. For smaller doses, please note each cap thread is approx. 1ml. May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30°C (86°F) and chlorine or ammonia levels are low, use a half dose. 50ml

Read more less

Removes chlorine, chloramine, and ammonia Detoxifies nitrite and nitrate Highly concentrated Marine and freshwater Safe™ is the complete and super-concentrated dry conditioner for both fresh and salt water. Safe™ removes chlorine, chloramine and detoxifies ammonia, nitrite, and nitrate. It is non-acidic and will not impact pH. A further bonus for the reef hobbyist—Safe™ will not over-activate skimmers. Safe™ may be used during tank cycling to alleviate ammonia/nitrite toxicity. It contains a binder which renders ammonia, nitrite, and nitrate non-toxic, allowing the biofilter to more efficiently remove them. Use at start-up and whenever adding or replacing water. When transporting or quarantining fish, use Seachem StressGuard™. When adding new fish, use Stability®. Both are ideal for use with Safe™. Directions Use 200 mg of Safe™ (included scoop) per each 200 L (50 US gallons) as needed to reduce chlorine and chloramine or per 50 L (13 US gallons) for ammonia. NOTE: These directions supersede all other prior packaging. May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite and nitrate in an emergency, up to 4 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.

Read more less

Stability will rapidly and safely establish the aquarium biofilter in freshwater and marine systems, thereby preventing the #1 cause of fish death: "new tank syndrome". Stability is formulated specifically for the aquarium and contains a synergistic blend of aerobic, anaerobic, and facultative bacteria which facilitate the breakdown of waste organics, ammonia, nitrite and nitrate. Unlike competing products, the bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms as well as aquatic plants, thus there is no danger of over use. Stability is the culmination of nearly a decade of research and development and represents the current state of the art in natural biological management. WHY IT'S DIFFERENT The bacteria used in competing products are inherently unstable. The conditions necessary for their growth and development fall into a very narrow range of temperatures, pH, organic loads, etc. When any of these parameters are not strictly within the proper range, the bacterial culture quickly crashes and dies. Stability does not contain any of the aforementioned bacteria. The bacteria strains in Stability have been in development for over a decade. The necessary conditions for growth of our bacterial strains encompass a very broad range. When other bacteria begin to die off (usually from high organic loads caused by the undetected death of an organism), Stability simply works harder and grows faster! The strains function in fresh or saltwater. Stability contains both nitrifying and denitrifying bacteria, a blend found in no other product. Additionally, Stability contains facultative bacterial strains which are able to adapt to either aerobic or anaerobic conditions. The bacteria in Stability are non-sulfur fixing, another innovation in the industry. Most other bacterial supplements will form toxic hydrogen sulfide under the proper conditions. Stability will not, ever. DIRECTIONS Use 1 capful (5ml) for each 40L (10 gallons) on the first day with a new aquarium. Then use 1 capful for each 80L (20 gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum biofilter performance use 1 capful for each 40L (10 gallons) once a month or with each water change and whenever introducing new fish or whenever medicating an aquarium. 50ml

Read more less

Overview Nearly all pet aquatics companies manufacture a product that removes chlorine. None of those, however, can compare in quality, concentration, or effectiveness to Seachem’s flagship product: Prime®. Prime® is the complete and concentrated conditioner for both fresh and saltwater. Prime® removes chlorine, chloramine and detoxifies ammonia, nitrite, and nitrate. It is non-acidic and will not impact pH. A further bonus for the reef hobbyist—Prime® will not over-activate skimmers. Prime® is up to 5x more concentrated than competing products and is the second most concentrated dechlorinator on the market only after our own aquavitro® alpha™. Prime® may be used during tank cycling to alleviate ammonia/nitrite toxicity. It contains a binder which renders ammonia, nitrite, and nitrate non-toxic, allowing the biofilter to more efficiently remove them. It will also detoxify any heavy metals found in the tap water at typical concentration levels. Use at start-up and whenever adding or replacing water. When transporting or quarantining fish, use Seachem StressGuard™. When adding new fish, use Stability®. Both are ideal for use with Prime®. Directions Use 1 capful (5 mL) for each 200 L (50 US gallons) of new water. For smaller volumes, please note each cap thread is approximately 1 mL. May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose. FAQ I think that my Prime® might be old because it smells like it went bad. A: Prime® has a very distinct odor that is similar to sulfur which is completely normal. I noticed some small black specks in the bottom of my bottle of Prime®. Is it still good? A: The presence of small black specks occasionally occurs and is normal. I am using Prime® to control ammonia but my test kit says it is not doing anything, in fact it looks like it added ammonia! What is going on? A: A Nessler based kit will not read ammonia properly if you are using Prime®... it will look "off scale", sort of a muddy brown (incidentally a Nessler kit will not work with any other products similar to Prime®). A salicylate based kit can be used, but with caution. Under the conditions of a salicylate kit the ammonia-Prime® complex will be broken down eventually giving a false reading of ammonia (same as with other products like Prime®), so the key with a salicylate kit is to take the reading right away. However, the best solution ;-) is to use our MultiTest™ Ammonia kit; it uses a gas exchange sensor system which is not affected by the presence of Prime® or other similar products. It also has the added advantage that it can detect the more dangerous free ammonia and distinguish it from total ammonia (total ammonia is both free ammonia and non-toxic ionized forms of ammonia). I tested my tap water after using Prime® and came up with an ammonia reading. Is this because of chloramine? Could you explain how this works in removing chloramine? A: Prime® works by removing chlorine from the water and then binds with ammonia until it can be consumed by your biological filtration (chloramine minus chlorine = ammonia). The bond is not reversible and ammonia is still available for your bacteria to consume. Prime® will not halt your cycling process. I am going to assume that you were using a liquid based reagent test kit (Nessler based, silica). Any type of reducing agent or ammonia binder (dechlorinators, etc) will give you a false positive. You can avoid this by using our MultiTest™ Ammonia kit (not affected by reducing agents) or you can wait to test, Prime® dissipates from your system within 24 hours. How does Prime® make a difference in reducing nitrates? A: The detoxification of nitrite and nitrate by Prime® (when used at elevated levels) is not well understood from a mechanistic standpoint. The most likely explanation is that the nitrite and nitrate is removed in a manner similar to the way ammonia is removed; i.e. it is bound and held in a inert state until such time that bacteria in the biological filter are able to take a hold of it, break it apart and use it. Two other possible scenarios are reduction to nitrogen (N2) gas or conversion into a benign organic nitrogen compound. I wish we had some more "concrete" explanation, but the end result is the same, it does actually detoxify nitrite and nitrate. This was unexpected chemically and thus initially we were not even aware of this, however we received numerous reports from customers stating that when they overdosed with Prime® they were able to reduce or eliminate the high death rates they experienced when their nitrite and nitrate levels were high. We have received enough reports to date to ensure that this is no fluke and is in fact a verifiable function of the product. How often can I dose Prime®? A: Prime® can be dosed every 24-48 hours. If Prime® is removing ammonia from the system, won’t that starve the beneficial bacteria? A: Prime® does not remove ammonia, nitrite, or nitrate from the system. It simply binds with those compounds making them harmless to the inhabitants and still bioavailable to the beneficial bacteria. How long does Prime® stay bound to the ammonia, nitrite, and nitrates? A: Prime® will bind up those compounds for up to 48 hours. If they are still present after that time frame, they are released back into the water, unless Prime® is re-dosed accordingly. Also, if your ammonia or nitrite levels are increasing within a 24-hour period, Prime® can be re-dosed every 24 hours. When should I use the emergency dose of 5 x the recommended amount of Prime®? A: If your ammonia or nitrite levels are above 2 ppm, you can safely use up to 5 x the recommended amount. Does Prime® expire? A: No, as long as Prime® has been stored properly, it will last indefinitely. My Prime® smells like garlic. Is this normal? A: Prime® can vary in smell based on the parameters in the warehouse during the time of manufacture. It does normally smell of Sulfur, but we have extensively tested the product and found that the difference in scent does not in any way effect how the product functions. It is still perfectly safe to use!

Read more less

  Overview Stability® will rapidly and safely establish the aquarium biofilter in freshwater and marine systems, thereby preventing the #1 cause of fish death: "new tank syndrome". Stability® is formulated specifically for the aquarium and contains a synergistic blend of aerobic, anaerobic, and facultative bacteria which facilitate the breakdown of waste organics, ammonia, nitrite, and nitrate. The bacteria employed by Stability® are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability® is completely harmless to all aquatic organisms as well as aquatic plants, thus there is no danger of over use. Stability® is the culmination of nearly a decade of research and development and represents the current state of the art in natural biological management. The bacteria used in competing products are inherently unstable. The conditions necessary for their growth and development fall into a very narrow range of temperatures, pH, organic loads, etc. When any of these parameters are not strictly within the proper range, the bacterial culture quickly crashes and dies. Stability® is not limited this way. The necessary conditions for the growth of Stability's™ bacteria strains encompass a very broad range. When other bacteria begin to die off (usually from high organic loads caused by the undetected death of an organism), Stability™ simply becomes more effective. Directions Shake well before use. Turn off UV/ozone. Use 1 capful (5 mL) for each 40 L (10 US gallons) on the first day with a new aquarium. Then use 1 capful for each 80 L (20 US gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum biofilter performance use 1 capful for each 80 L (20 US gallons) once a month or with each water change and whenever introducing new fish or whenever medicating an aquarium. Product shelf life is 6 years from date of manufacture. Stability® should ideally be used in conjunction with biological filtration such as Seachem Matrix™. For emergency ammonia control, use Seachem AmGuard™. FAQ When dosing Stability™, how long should I turn off my UV filter or my ozone? A: The UV and/or ozone should be kept off for the 7 days you are dosing if you are cycling or for at least 24 hours if it is for Stability™ additions of new fish or water changes. The reason both should be turned off is because UV and ozone break down and kill bacteria. What is a reasonable amount of time to allow the Stability™ to come out of the spore state and find a home to attach themselves? A: The bacteria should be able to find a suitable home within 24 hours. I just finished cycling my new tank, but i made a mistake of introducing many fishes at the same time. i was wondering if i could use Stability™ to increase the bb's for the increased bioload? A: Yes, Stability™ will prove very helpful in removing ammonia and nitrite, including nitrate, as a result of the increased bioload. If your ammonia level is not at zero, a combination of Stability™ and AmGuard is very useful and great in reducing ammonia toxicity on the bacteria blend as the bacteria consumes the ammonia, nitrite and nitrate in the aquarium Why does Stability™ not need refrigeration? If there's living bacteria in the solution, how do they stay alive for so long? Or is there something else besides bacteria in the product altogether? A: The bacteria in Stability™ are alive but not active. They exist in a spore form. They can withstand extreme temperatures and do not require food to survive. When you add them to your aquarium they become active due to dilution. The bacteria that require refrigeration are active. Refrigerating them slows down their life cycle and they require less food when cold. Because they are active they do require food, and that is packaged with them. They also will not survive extreme heat or cold and will die when they run out of food. Can Stability™ be overdosed? A: It is very hard to overdose Stability. You can really never have too much beneficial bacteria. The worst thing that could happen is a bacterial bloom in the water column, but this is rare and will clear on its own, should it occur. I have finished the suggested 7-day dosing, however, my tank is still not fully cycled. Why? A: Since every tank will cycle differently, it is difficult for us to give an exact time frame as to when your tank will be fully cycled. However, generally most tanks are cycled within 4-6 weeks. If I plan to do a fishless cycle and use Stability™, do I need to add an ammonia source to kick-start the nitrogen cycle? A: Yes, for expedited cycling times, you will want to add a pinch of food daily until you have an ammonia reading. At that point, you can stop adding the food and let the bacteria run its course.

Read more less

Achieve Sparkling, Polished Water. The Easy, All-in-One Solution. Tired of cloudy, hazy water? The Aqua-Pics Clear Water Block is your secret weapon for achieving a pristine, professionally polished aquarium. This powerful, slow-dissolving block works continuously for up to a month to clump together tiny, floating particles—making it easy for your filter to remove them. Simply drop it in and let it work its magic for brilliantly clear water that showcases your fish and aquascape. Key Features & Benefits: Eliminates Cloudy Water: Effectively clears hazy water caused by fine dust, debris, and suspended waste particles, polishing your water to a brilliant shine. Long-Lasting Formula: One 20g block works continuously for up to 30 days, providing a prolonged solution rather than a quick fix. All-in-One Convenience: No messy powders or liquids to measure. Just place the pre-measured block in your filter’s water flow and forget it. Filter Safe & Fish Safe: Perfectly safe for all fish, plants, invertebrates, and beneficial filter bacteria when used as directed. Supercharges Your Filter: Works in tandem with your existing filter, enhancing its ability to trap the finest particles that would normally pass through. Product Details: Product Name: Aqua-Pics Clear Water Block Size / Dosage: 20 Gram Block ( treats up to 200 Litres / 50 US Gallons for one month) Type: Slow-dissolving water clarifier block Use: For all freshwater aquariums. How To Use (It's Simple!): Identify: Determine the cause of cloudiness (e.g., bacterial bloom, fine debris). This block is most effective against floating particulate matter. Place: Rinse the block briefly in cool water. Place it directly in your filter, ideally in the compartment where water flows through your filter media (e.g., next to the sponge or floss). Forget: Allow the block to dissolve slowly over several weeks. It will continuously clarify your water. Remove & Replace: After 30 days, or once the block has fully dissolved, remove any leftover residue. Replace with a new block if needed. Who is this product for? Aqua-Pics Clear Water Block is essential for: Aquarists battling persistent cloudy or hazy water. Anyone setting up a new tank experiencing a bacterial bloom. Hobbyists who have stirred up the substrate during cleaning or rescapes. Those who want a low-maintenance, set-and-forget solution for pristine water clarity. For Best Results: Ensure your filter is running properly and is not clogged. Always address the root cause of cloudiness, which is often excess waste or overfeeding. For severe cloudiness, a water change before adding the block can improve results. Order with Confidence: One 20g block treats aquariums up to 200L / 50 gallons. For larger tanks, use multiple blocks as needed. FAQ Section (Suggested for the product page): Q: How is this different from liquid water clarifiers?A: Liquid clarifiers work instantly but require repeated dosing. The Clear Water Block provides a slow, continuous release, working around the clock for up to a month without you needing to remember daily doses. Q: Will this harm my shrimp, snails, or sensitive fish?A: No, when used as directed, the Clear Water Block is completely safe for all aquarium inhabitants, including delicate invertebrates like shrimp and snails. Q: My water is cloudy but green. Will this work?A: No. This product is designed to clear hazy water caused by floating debris (white/gray cloudiness). Green water is caused by free-floating algae and requires a different solution, such as a UV sterilizer, reduced lighting, or an algae control product. Q: How long does it take to see results?A: You should see a significant improvement in water clarity within 24-48 hours as the filter begins to remove the clumped particles.

Read more less

Stability® will rapidly and safely establish the aquarium biofilter in freshwater and marine systems, thereby preventing the #1 cause of fish death: "new tank syndrome". Stability® is formulated specifically for the aquarium and contains a synergistic blend of aerobic, anaerobic, and facultative bacteria which facilitate the breakdown of waste organics, ammonia, nitrite, and nitrate. The bacteria employed by Stability® are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability® is completely harmless to all aquatic organisms as well as aquatic plants, thus there is no danger of over use. Stability® is the culmination of nearly a decade of research and development and represents the current state of the art in natural biological management. The bacteria used in competing products are inherently unstable. The conditions necessary for their growth and development fall into a very narrow range of temperatures, pH, organic loads, etc. When any of these parameters are not strictly within the proper range, the bacterial culture quickly crashes and dies. Stability® is not limited this way. The necessary conditions for the growth of Stability's™ bacteria strains encompass a very broad range. When other bacteria begin to die off (usually from high organic loads caused by the undetected death of an organism), Stability™ simply becomes more effective. Shake well before use. Turn off UV/ozone. Use 1 capful (5 mL) for each 40 L (10 US gallons) on the first day with a new aquarium. Then use 1 capful for each 80 L (20 US gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days. For optimum biofilter performance use 1 capful for each 80 L (20 US gallons) once a month or with each water change and whenever introducing new fish or whenever medicating an aquarium. Product shelf life is 4 years from date of manufacture. Stability® should ideally be used in conjunction with biological filtration such as Seachem Matrix™. For emergency ammonia control, use Seachem AmGuard™.

Read more less

MacroPore™ – Advanced Nitrate Control & Water Clarification System Professional-Grade Filtration Media for Pristine Aquariums Key Benefits: ✔ Efficient Nitrate Removal – Absorbs nitrogenous waste compounds✔ Crystal Clear Water – Polishes water to exceptional clarity✔ Long-Lasting Performance – Treats 9,600L for ~6 months✔ Rechargeable Formula – Cost-effective sustainable use Usage Instructions Initial Setup: Rinse media in fine mesh filter bag Place in high-flow area of your filtration system Capacity Indicator: Exhausted when unable to bleach white or maintain water clarity Recharging Process For Freshwater Aquariums: Salt Recharge (6% Solution): Dissolve 2 handfuls non-iodized salt in 1L water Soak media for 12 hours → Rinse thoroughly Note: 1 in 4 recharges will require bleach treatment For Marine Aquariums (Required): Bleach Treatment: 1:1 bleach:water solution (generic bleach) Soak 12 hours → Rinse completely Chlorine Neutralization: Soak in fresh water with chlorine neutralizer (2 tbsp/cup) for 8 hours Final Check: Verify no chlorine odor remains Optional: Conduct chlorine test Freshwater Final Prep: Soak 3 hours with ½ tsp pH down before reuse Technical Specifications Type: Macro-porous synthetic polymer Chemistry: Non-toxic, reef-safe when properly prepared Maintenance: Monitor for dark discoloration as recharge indicator Pro Tip: For optimal performance, combine with mechanical filtration and maintain regular recharge schedule based on bioload.

Read more less

Pond & Aquarium Clear Blocks – Crystal Clear Water in Just 7 Days! Fast-Acting Algae & Bacteria Control:Our powerful anti-bacterial blocks eliminate green water and bacterial blooms (often mistaken for algae) in approximately 7 days, keeping your water pristine for 3–4 weeks (varies with water hardness). Dual-Action Benefits:✔ Stops Unsightly Green Water & Bacterial Blooms – Targets the root cause.✔ Helps Prevent Ammonia Spikes – Supports a healthier aquatic environment.✔ Stabilizes pH – Resists acidification for balanced water chemistry. Available in 4 Convenient Sizes:🔴 RED (25g) – Treats 10–100L🔵 BLUE (25g) – Treats 100–800L🟢 GREEN (25g) – Treats 500–1500L🟢 LARGE GREEN (65g) – Treats 100–3500L Ideal for ponds & aquariums – A simple, long-lasting solution for clearer, safer water!

Read more less

Ultra-Concentrated Water Conditioner for Aquariums & Ponds Powerful Dual-Action Formula:✔ Instantly neutralizes chlorine, chloramine, and heavy metals✔ Detoxifies ammonia by converting it to safe hexamine✔ Works in both freshwater and saltwater systems Dosage Guide: Chlorine Removal: 5ml treats 300 liters Ammonia Detoxification: 10ml treats 100 liters Severe Weather Conditions: Increase dosage during windy, wet, or dry periods when water quality fluctuates How to Calculate Your Tank Volume: Measure length × width × water height (in cm) Divide by 1000 = Total liters*(Example: 100cm × 50cm × 40cm ÷ 1000 = 200 liters)* Pro Tip: Store in a cool, dry place and shake well before use. Ideal for emergency water treatment in stored drinking water systems.

Read more less

Ultra Chlor™ – Professional-Strength Water Detoxifier Powerful Concentrated Powder for Ponds & Aquariums Key Features:✔ Instantly neutralizes chlorine & toxic ions (effective up to 3ppm)✔ Ultra-concentrated formula – 1g treats 1,000 liters✔ Weather-adjusted dosing for changing environmental conditions Precise Dosing Instructions:🔹 Standard Treatment: 1g per 1,000 liters🔹 Severe Weather Conditions (windy/wet/dry): Up to 5x normal doseNote: Turbid water and municipal supply fluctuations may require higher doses Why Adjust for Weather?Extreme conditions can: Increase water turbidity Boost bacterial growth Alter municipal chlorine levels Usage Tips:• Pre-dissolve in clean water before adding to large systems• Store in airtight container in cool, dry place• Ideal for emergency water treatment during storms THIS IS SIMILAR AND MORE EFFECTIVE THEN SEACHEM SAFE.

Read more less